LIGNO Acoustic light panels are attached over their entire surface to a substructure directly on a wall or ceiling. In the case of ceiling mounting, suspended substructures are also possible.
made of LIGNO®
Versatile interior finishings in real wood
The LIGNO Acoustic light panels are used for sound-absorbing wall and ceiling claddings. Individual design ideas can be implemented on the basis of naturally grown wood – with a large choice of wood types and profile variations for the surface, both in the residential sector and in commercial construction. The lightweight acoustic panels, which are harmless in terms of building biology, supplement the Lignotrend range of load-bearing cross-laminated timber products by a visually and acoustically appropriate interior finishing variant. For new buildings and for renovations.
LIGNO Acoustic elements
Versatile application areas
Acoustic cladding for wall and ceiling
Suspended individually or in groups on thin cables, the acoustic elements reduce disturbing sound reflections as a local measure – for instance above office workstations, reception desks or conference tables. The lighting can be installed ex works in the prefabricated acoustic sails.
Cut-to-size element panels are also suitable for installation in conventional grid or cassette ceiling systems or for the replacement of damaged or dirty old panels. They are simply placed loose in the existing support rail construction.
Solve individual acoustic requirements flexibly
Acoustic panel configuration options
LIGNO Acoustic light panels are manufactured entirely from grown, domestic timber. The integrated acoustic absorbers consist of natural wood fibre and the adhesives used are also guaranteed to be low-emission. Like all Lignotrend products, they also bear the natureplus seal for building biology quality.
The acoustic absorber is integrated directly in the LIGNO Acoustic light panel. With their broadband effect, the elements achieve high absorption values. Apart from that there are acoustically optimised mounting configurations – for instance for low-frequency absorption. A certain sound steering can be achieved with low-absorbing variants.
Help with planning
In the room acoustics planning, particular attention is paid to the room size, intended use and acoustic requirements. Lignotrend offers online room acoustics calculation tools for this. The effect of room-acoustics measures can thus be estimated even before conception and implementation.
Claddings in public assembly rooms must be made of flame-retardant building materials. Nevertheless, Lignotrend manufactures its acoustic panels with real wood surfaces: If a fire breaks out, fire protection agents that are harmless and remain invisible curtail the spread of the fire.
With many different types of wood and profiles, as well as the possibility to choose the surface treatment, LIGNO Acoustic light panels offer a broad spectrum for aesthetic interior architecture that in no way looks rustic. An attractive real wood pattern is achieved with the slat profiles.
LIGNO Acoustic light panels are easy to process. The large format with a width of 625 mm and a length of 2,940 mm allows fast installation speeds. Individual lengths up to 8,000 mm are possible on request. The longitudinal joint in the acoustic ceiling can thus be omitted.
LIGNO Acoustic light panels are fastened invisibly with clamps or screws. These are completely concealed in the acoustic joints and the homogeneous real wood surface thus remains intact.
Product properties of the acoustic elements
Since 2006, Lignotrend products have fulfilled the particularly strict criteria for the natureplus® quality mark and thus officially belong to the most environmentally friendly and harmless building materials in Europe.
Many people are not aware that in most interiors action with regard to the room acoustics is needed. Indeed, room acoustics is important in the planning – and not only in halls or classrooms, but everywhere, even in the private dwelling environment. Quiet and good speech intelligibility increase the practical value of the room – quite apart from the positive health effect of noise reduction.
Various profiles and low-frequency absorbers
Planning assistance software
With the Lignotrend room acoustics calculator, reverberation or noise level reductions can be calculated and compared with the regulations of DIN 18041 - Audibility in rooms. Planners and building owners can use the online tool to make orienting calculations for the required absorber surfaces from Lignotrend products. A distinction is made according to the room groups from DIN.
Planning assistance software
Software for support
When building rooms for a large number of people according to the Venue Regulations, suspended ceilings and claddings often have to be executed with flame-retardant surfaces.
Therefore, variants were developed for the surfaces of the LIGNO Acoustic light and LIGNO Acoustic Sport acoustic panels that have been tested for flame retardancy.
Normal to flame-retardant
The Lignotrend production department specialises in producing acoustic panels and load-bearing cross-laminated timber elements with high-quality visible surfaces in real wood. From aesthetic knotless to naturally knotty: For the one-ply-panels of the visible surfaces, Lignotrend processes various types and grades of as-grown timber.
Silver fir – oak – etc.
LIGNO Akustik light panels are attached directly to the wall or ceiling over their entire surface on a substructure. Suspended substructures are also possible for ceiling installation.
fast construction time
Additive real wood panels improve room acoustics and design
From office to swimming pool
Accessories and supplementary products
Screws for LIGNO Acoustic light and Sport / 3.5 x 40 mm
Screws for the concealed installation of acoustic claddings on timber substructures
SPAX full-thread screw incl. screwdriver bit
for timber substructures of LIGNO Acoustic light 3S-33
- Full-thread screw with cylindrical head
- Stainless steel A4
- 4-cut tip
- Package contents: 200 pcs incl. screwdriver bit
(one Torx special bit with extended tip per package)
- Requirement per m2 approx. 10 pieces
- 3.5 x 40 mm
- Head diameter 4 mm
(ideal for concealed fastening through 4 mm acoustic gap)
LIGNO inspection flap for Acoustic light 3S-33
Aluminium frame for flush insertion of the inspection door cover -
cutting to size of an acoustic element
- 2 hex socket locks
- 2 special hinges for opening (90°), not visible when closed
- Chain guard to prevent dropping down
- Frame is mounted on 27 mm substructure and
is attached to the side of the substructure with 4 screws
- Can be inserted flush in the ceiling with a 4 mm joint all round
- L 625 x W 625 x H 42.5 mm (internal 40.5 mm)
- Opening dimension: L 610 x W 610 mm
Wooden cover is cut to size from a normal acoustic element on site and screwed to the aluminium frame. Self-drilling screws can be used or alternatively holes can be drilled in the frame.
Cover made of acoustic elements not included in the scope of delivery.
LED light strip, wide
LIGNO LED light strip for flush installation in acoustic claddings.
High-quality surface-mounted light made of extruded aluminium profile
- Light strip 28 mm wide
- Compatible with profile variants _625-12-4, _625-12n25-4 and _625-22n40-4
- Harpoon formation 4.2 mm
- L x W x H: approx. (n x 100 + 15) x 28 x 27 mm max. length 2915 mm per element
- Diffusers made of white translucent PMMA, flush with profile
- LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V
- Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20
- Prepared for on-site connection to converters