Choose your language

filter

It’s a match 

The matching accessories are also available from Lignotrend

Connectors, fillings, termination strips and much more: For the use of our elements, we supply you with suitable accessories as required. Select product and category in the accessories filter: In this way, you can find out in no time which suitable materials and equipment we offer you for your construction task.

      • Edge strips with fold, silver fir 

          
        Visually appealing edge termination on free edges of ceiling and wall claddings.
        Available in various types of wood, treatments, heights and fold widths
        .

        Product affiliation acoustic cladding
        Filter category edge termination

        Types of wood and treatment options

        • Silver fir patterned, untreated 
        • Silver fir patterned, untreated, B-s2-d0 
        • Silver fir patterned, oiled
        • Silver fir patterned, oiled, B-s2-d0
        • Silver fir patterned, lacquered
        • Silver fir patterned, lacquered, B-s2-d0
        • Silver fir plain, untreated
        • Silver fir plain, oiled
        • Silver fir plain, lacquered

        Height

        • H 63 mm x L 2970 mm 
        • H 92 mm x L 2970 mm 
        • H 110 mm x L 2970 mm

        Thickness depending on the selected fold width

        • 2 mm fold - 14 mm thickness 
        • 3 mm fold - 15 mm thickness  
        • 4 mm fold - 16 mm thickness

        For the exact definition of the slat, a sketch must be enclosed when ordering.

      • Edge strip with fold, oak 

          
        Visually appealing edge termination on free edges of ceiling and wall claddings.
        Available in various treatments, heights and fold widths.

        Product affiliation acoustic cladding
        Filter category edge termination

        Types of wood and treatment options

        • Oak untreated 
        • Oak oiled 
        • Oak lacquered

        Height

        • H 63 mm x L 2970 mm 
        • H 92 mm x L 2970 mm 
        • H 110 mm x L 2970 mm 

        Thickness depending on the selected fold with

        • 2 mm fold - 14 mm thickness 
        • 3 mm fold - 15 mm thickness 
        • 4 mm fold - 16 mm thickness

        For the exact definition of the slat, a sketch must be enclosed when ordering.

      • ProClima vapour barrier DA Connect 

          
        Weatherable vapour barrier and air sealing membrane for roof insulation with self-adhesive zones.

        Product affiliation roof component, wall component
        Filter category air seal

        Vapour barrier and air sealing membrane on formwork under rafter insulation

         

        Properties

        • sd value 1.3 m [water vapour diffusion resistance] 
        • Simple and secure bonding thanks to integrated adhesive edge strips 
        • Water-repellent and waterproof 

        Dimensions

        • L 50 m x 1,50 m  
      • Natural limestone gravel: injection service  

          
        Filled directly from the silo vehicle, with specialist and coordination on site.

        Product affiliation ceiling component
        Filter category insulation

        Injection service for limestone gravel for optimised sound insulation

         

        • Rational filling from the silo vehicle 
        • Cost assurance through flat rate 
        • Optimised processes, experienced employees 
        • Practically dust-free process 
      • Natural limestone gravel in container, air-dry 

          
        Filling of ceiling elements with limestone gravel for impact sound insulation, especially in the low-frequency range. Available as bagged goods or loose in a big bag.

        Product affiliation ceiling component
        Filter category insulation

        Limestone gravel fillings for optimised sound insulation

         

        Limestone gravel as bagged goods

        • air-dry, max. residual humidity 5.0 % 
        • grain size approx. 2.8 - 4 mm 
        • approx. 25 kg/sack [pallet of 42 sacks = 1.05 t] 

        Limestone gravel loose in big bag

        • air-dry, max. residual humidity 5.0 % 
        • grain size approx. 8 mm 
        • approx. 955 kg/big bag 
      • Thermal insulation ex works for box elements 

          
        In the case of the box element, inter-web spaces can be filled with thermal insulation (cellulose, mineral fibre) ex works.

        Product affiliation roof component
        Filter category insulation

        Properties

        • Reliable, complete filling 
        • Savings on height 
        • Observe building physics 
      • All-round adhesive tape with non-woven tape 

          
        Weatherable and airtight bonding of roof and renovation vapour barriers as well as air sealing membranes.

        Product affiliation roof component, wall component
        Filter category air seal

        Properties

        • Suitable for outdoor and indoor use 
        • Durable and tight bonding 
        • Supple non-woven tape, can be torn off by hand 
        • For airtight connections according to DIN 4108-7, SIA 180 and OENORM B 8110-2 

        Dimensions

        • L 30 m x W 6 cm 
      • UV-protection stain “Lignovit UV 100” 

          
        Water-thinnable, breathable wood stain without active ingredients for indoor use. Contains effective light protection agents for the absorption of UV radiation and stabilisation of the wood component lignin.

        Product affiliation all products
        Filter category treatment

        Light protection agent for absorption of UV radiation

         

        Properties

        • Water-based, thin-layer glaze for indoor use based on an acrylate emulsion 
        • Absorption of UV radiation and stabilisation of the wood component lignin 
        • Transparent and matt adjustment ensures a natural appearance for softwoods 
        • High breathability – healthy indoor climate 
        • Free of chemical wood preservatives 

        Application

        • Brush, roller, spray, Vacumat 
        • Yield: approx. 10 - 12 m²/l 
        • Do not use below +10 °C 
        • High air humidity and/or low temperatures delay drying 
      • Pfetex purlin connection web 

          
        Anti-slip, transparent and self-adhesive purlin connection web for easy connection to vapour barrier

        Product affiliation roof components
        Filter category air seal

        Self-adhesive special film with non-slip structure and high continuous adhesive strength

         

        Properties

        • Anti-slip even in wet conditions 
        • Transparent - therefore easy fitting to the rafters 
        • Stability due to tear resistance and compressive strength 
        • Simple and fast application due to self-adhesive ends
        • High ageing resistance - the adhesive can neither dry out nor become brittle 

        Dimensions

        • L 25 m x H 57 cm 
        • 4 rolls/package 
        • Weight approx. 207 g/m 
        • Adhesive tape thickness 0.45 mm
      • Universal lifting clamp 

          
        LIGNO lifting clamp for mounting ceiling or roof element strips without damaging the visible surface.

        Product affiliation ceiling component, roof component
        Filter category installation

        LIGNO universal lifting clamp

         

        Properties

        • Adaptable to the various necessary gripping widths
        • Two clamps required per element
        • For loan or purchase
      • Würth transport anchor 

          
        The transport anchor allows the safe and simple lifting of timber components made of LIGNO. An expert’s report is available for the ASSY 4 Combi T transport anchor screw or ASSY 3.0 combination screw.

        Product affiliation ceiling component, roof component, wall component
        Filter category installation

        Transport anchor with chain link and stop on the crossmember

         

        Properties

        • Load capacity 1.3 t 
        • Galvanised surface 
        • Material: steel 

        Dimensions

        • Stirrup length: 165 mm 
        • Internal width: 40 mm 
      • Edge board 8 mm plywood

        Edge boards for front end element termination

        Product affiliation ceiling component
        Filter category edge termination

        Properties

        • Material: plywood 
        • Installation on site 

        Dimensions

        • Thickness: 8 mm 
        • Length: 2500 mm 
        • Height dependent on element type 
      • Screws for LIGNO Acoustic light and Sport / 3.5 x 40 mm 

          
        Screws for the concealed installation of acoustic claddings on timber substructures

        Product affiliation acoustic cladding
        Filter category connector

        SPAX full-thread screw incl. screwdriver bit
        for timber substructures of LIGNO Acoustic light 3S-33

         

        Properties

        • Full-thread screw with cylindrical head 
        • Stainless steel A4 
        • 4-cut tip 
        • Package contents: 200 pcs incl. screwdriver bit 
          (one Torx special bit with extended tip per package)
           
        • Requirement per m2 approx. 10 pieces 

        Dimensions

        • 3.5 x 40 mm 
        • Head diameter 4 mm 
          (ideal for concealed fastening through 4 mm acoustic gap) 
      • Screws, highly corrosion resistant,
        for LIGNO Acoustic light / 3.5 x 43 mm 

          
        Highly corrosion-resistant screws for the concealed installation of acoustic claddings in rooms with increased humidity or atmosphere containing chlorine.

        Product affiliation acoustic cladding
        Filter category connector

        Screws for concealed fastening, incl. screwdriver bit 
        for LIGNO Acoustic light 3S-33 (e.g. in indoor swimming pools)

         

        Properties

        • Special screw with countersunk head 
        • Highly corrosion-resistant steel material 1.4539
          (fastener for indoor swimming pools - other than brine baths) 
        • 4-cut tip 
        • Package contents: 200 pcs incl. screwdriver bit 
          (one Torx special bit with extended tip per package
           

        Dimensions

        • 3.5 x 43 mm 
        • Head diameter 4 mm 
          (ideal for concealed fastening through 4 mm acoustic gap) 
      • Screws for sheet metal profiles, 
        for LIGNO Acoustic light / 3.5 x 48 mm 

          
        Sheet metal screws for mounting acoustic claddings on metal profiles

        Product affiliation acoustic cladding
        Filter category connector

        SPAX special screw incl. screwdriver bit 
        for LIGNO Acoustic light 3S-33

         

        Properties

        • Full-thread screw with cylindrical head 
        • Steel with Wirox coating 
        • 4-cut tip 
        • Package contents: 200 pcs incl. screwdriver bit 
          (one Torx special bit with extended tip per package)
           

        Dimensions

        • 3.5 x 48 mm 
        • Head diameter 4 mm 
          (ideal for concealed fastening through 4 mm acoustic gap) 
      • Substructure made of multi-layered board strips 

          
        Precise installation due to even and straight substructures. No warping due to dimensionally accurate and ground surfaces.

        Product affiliation acoustic cladding
        Filter category substructure

        Properties

        • Multi-layered board strips C/C quality 
        • Guiding value for installation approx. 20 min/m² 

        Dimensions

        • 2500 x 95 x 27 mm 
      • Substructure made of solid timber (B-s2-d0) 

          
        Flame retardant substructure for LIGNO Acoustic light; Fire protection classification: EN 13501-1

        Product affiliation acoustic cladding
        Filter category substructure

        Properties

        • Dried, planed on four sides and slightly chamfered 
        • Indoor use GK1 + GK2 according to: EN 335, EN 14915 
        • Glued multiple times in thickness 
        • Pine or spruce 
        • Guiding value for installation approx. 20 min/m2 

        Dimenstions

        • L 3000 x  W 95 x H 27 mm 
      • Substructure made of plywood strips 

          
        Strips of veneered board for impact wall substructure. The plywood strips are particularly suitable for elastic stress.

        Product affiliation impact wall cladding
        Filter category substructure

        Dimensions

        • Plywood strip 2500 x 50 x 18 mm 
        • Bearing blocks 50 x 50 x 18 mm 

        The technical values of the test certificate only be adhered to in combination with the Lignotrend impact wall substructure.

      • G.U.T. installation connectors 

          
        Corner connectors made of high-strength polyamide for simple and cost-effective placement of LIGNO wall components.

        Product affiliation wall component
        Filter category connector

        Properties

        • Weather-independent system 
        • Precise, simple placement and connection 
        • 50 pcs./carton 

        Dimensions

        • L 290 x W 30 x H 175 mm  
        • Thickness: 34 mm 
      • Grid ceiling blanks 

          
        Cut-to-size boards of LIGNO Acoustic light elements for installation in grid ceiling systems

        Product affiliation acoustic cladding
        Filter category special configuration

        The LIGNO Acoustic light 3S-33 boards can be delivered ready cut to size for insertion into grid ceilings 
        (e.g. from DONN profiles DX 24).

        Dimensions

        • L 613 mm x W 613 mm (individual blanks up to max. 625 mm width on enquiry) 
        • Weight: 9.1 kg/m² 
      • Fire retardant foil Interdens type 15 

          
        Flexible fire protection material for the fire-protective implementation of electrical installations

        Product affiliation wall component
        Filter category fire protection

        Building material that foams in case of fire to improve the fire resistance duration for electrical installations in LIGNO wall components. The expansion of the building material seals cavities to prevent the spread of heat, smoke and flames.

        Dimensions

        • L 333 mm x W 500 mm 
        • L 400 mm x W 500 mm 
        • L 500 mm x W 500 mm 
      • Insulating strips of soft wood fibre 

          
        Soft wood fibre insulation for LIGNO Uni Q3 HL

        Product affiliation wall component
        Filter category insulation

        Dimensions

        • L 575 mm x W 155 mm x H 60 
      • Mineral wool insulating strips 


        Mineral fibre insulation for LIGNO Uni Q3 HL

        Product affiliation wall component
        Filter category insulation

        Dimensions

        • L 7000 mm x W 157 mm x H 80 
      • HILTI fire protection brick CFS-BL P 

          
        Fire bulkhead for various pipes and electrical installations

        Product affiliation ceiling component, roof component
        Filter category fire protection

        HILTI fire protection bricks are used for the sealing of cables and pipes in piping and electrical installations. They are ideally suited for highly fibre-sensitive and dust-sensitive rooms and locations with frequently changing electrical installations such as data centres, computer rooms, hospitals, laboratories.


        Advantages

        • Plastic label can remain on the brick (easier installation) 
        • Particularly suitable for subsequent laying of cables 
        • Can be combined with fire protection foam CP 660 (combination bulkhead) 
        • Cost-effective due to short installation time 
        • Feed-through of electrical conduits with and without cables 
        • Simple processing, no special tools required 
        • Absolutely dust and fibre-free 

        Dimensions

        • L 200 x W 130 x H 50 mm 
      • LIGNO inspection flap for Acoustic light 3S-33 

          
        Aluminium frame for flush insertion of the inspection door cover -
        cutting to size of an acoustic element

        Product affiliation acoustic cladding
        Filter category supplementary products

        Properties

        • 2 hex socket locks 
        • 2 special hinges for opening (90°), not visible when closed 
        • Chain guard to prevent dropping down 

        Installation

        • Frame is mounted on 27 mm substructure and 
          is attached to the side of the substructure with 4 screws 
        • Can be inserted flush in the ceiling with a 4 mm joint all round 

        Dimensions

        • L 625 x W 625 x H 42.5 mm (internal 40.5 mm) 
        • Opening dimension: L 610 x W 610 mm 

        Wooden cover is cut to size from a normal acoustic element on site and screwed to the aluminium frame. Self-drilling screws can be used or alternatively holes can be drilled in the frame.


        Cover made of acoustic elements not included in the scope of delivery.

      • LIGNO inspection flap for Acoustic light 3S-33 

          
        Aluminium frame for flush insertion of the inspection door cover -
        cutting to size of an acoustic element

        Product affiliation acoustic cladding
        Filter category supplementary products

        Properties

        • 2 hex socket locks 
        • 2 special hinges for opening (90°), not visible when closed 
        • Chain guard to prevent dropping down 

        Installation

        • Frame is mounted on 27 mm substructure and 
          is attached to the side of the substructure with 4 screws 
        • Can be inserted flush in the ceiling with a 4 mm joint all round. 

        Dimensions

        • L 625 x W 370 x H 42.5 mm (internal 40.5 mm) 
        • Opening dimension: L 610 x W 355 mm 

        Wooden cover is cut to size from a normal acoustic element on site and screwed to the aluminium frame. Self-drilling screws can be used or alternatively holes can be drilled in the frame.


        Cover made of acoustic elements not included in the scope of delivery.

      • Inspection door cover for LIGNO inspection flap  

          
        Cutting to size of the inspection door cover from acoustic element. Available in different dimensions.

        Product affiliation acoustic cladding
        Filter category supplementary products

        Properties

        • Ceiling is seamed all round for LIGNO inspection flap 
        • Includes 2 holes diameter 15 mm for turning locks 

        Installation

        • Cover is screwed to inspection frame 

        Cutting size

        • L 625 x W 599 mm or, for the smaller version, 
        • L 625 x W 355 mm 
      • Disposable plastic mounting loop 

          
        For lifting LIGNO wall components. Disposable loops are hooked into the head plate during pre-assembly. Available in different versions.

        Product affiliation wall component
        Filter category installation

        Installation

        • Disposable loops are hooked into the head plate during pre-assembly 

        Circumference

        • 80 cm 
        • 180 cm 
      • Sill / head plate 

          
        Cross-laminated timber sills and head plate profile in industrial quality
        Available in different dimensions
        .

        Product affiliation wall component
        Filter category supplementary products

        Dimensions

        • L 1200 mm x W 80 mm x H 80 mm 
        • L 1200 mm x W 80 mm x H 120 mm 
        • L 1200 mm x W 80 mm x H 200 mm 
        • L 1200 mm x W 80 mm x H 240 mm 
      • One-ply-panel for component supplementation 

          
        Raw board sanded on one side Available in different versions.

        Product affiliation ceiling components, roof components, wall components, acoustic cladding, impact wall cladding
        Filter category edge termination

        Types of wood and dimensions

        • Silver fir patterned L 2970 mm x W 1290 mm x H 40 mm 
        • Silver fir patterned L 2970 mm x W 640 mm x H 7.5 mm 
        • Silver fir patterned, PU glued
          L 2960 mm x W 640 mm x H 7.5 mm
           
        • Silver fir patterned, PU glued
          L 2960 mm x W 640 mm x H 13 mm 
        • Silver fir patterned, B-s2-d0 (fire retardant) L 2970 mm x W 640 mm x H 20 mm 
        • Silver fir patterned 2970 mm x W 645 mm x H 20 mm 
        • Silver fir patterned L 2960 mm x W 650 mm x H 7.5 mm 
        • Silver fir industry L 2960 mm x W 640 mm x H 7.5 mm 
        • Silver fir economy
          L 2970 mm x W 640 mm x H 7.5 mm 
        • Silver fir economy L 2960 mm x W 650 mm x H 7.5 mm 
        • Silver fir plain L 2970 mm x W 640 mm x H 7.5 mm 
        • Silver fir plain L 2970 mm x W 645 mm x H 20 mm 
        • Oak L 2970 mm x W 645 mm x H 20 mm 
        • Oak L 2960 mm x W 640 mm x H 7.5 mm 
        • Spruce A-quality L 2970 mm x W 1290 mm x H 20 mm 
        • Spruce knotless, plain L 2970 mm x W 640 mm x H 20 mm 
      • Three-layer board silver fir 

          
        Knotless surface of finger-jointed slats, rift and half-rift cut, to match the pattern of the Lignotrend element surfaces in silver fir.

        Product affiliation ceiling components, roof components, wall components, acoustic cladding, impact wall cladding
        Filter category edge termination

        Types of wood and dimensions

        • Silver fir patterned L 2970 mm x W 1290 mm x H 20 mm 
        • Silver fir patterned, B-s2-d0 (fire retardant) L 2970 mm x W 640 mm x H 21 mm 
        • Silver fir patterned, continuous slats L 2970 mm x W 1290 mm x H 20 mm 
      • Compressed air staple gun 

          
        Staple gun for the concealed fastening of acoustic claddings.

        Product affiliation acoustic cladding
        Filter category installation

        Staple gun for the almost invisible attachment of spreader staples. 
        Due to the narrow foot, the base of the groove is easily reached.

         

        Properties

        • Staple gun type 3428 for acoustic panels of type 3S-33 and 3G-33 
        • Suitable for groove widths from 4 mm 
      • LED light strip, narrow 

          
        LIGNO LED light strip for flush installation in acoustic claddings.

        Product affiliation acoustic cladding
        Filter category supplementary products

        High-quality surface-mounted light made of extruded aluminium profile

         

        Properties

        • Light strip 20 mm wide 
        • Compatible with profile variants _625-20-4 and _625-12n25-4 
        • Harpoon formation 4.2 mm 
        • L x W x H: approx. (n x 100 + 15) x 20 x 27 mm max. length 2915 mm per element 
        • Diffusers made of white translucent PMMA, flush with profile 
        • LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V 
        • Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20 
        • Prepared for on-site connection to converters 

        Flush installation

        LIGNO LED light strips

        Luminous intensity
        in lm / m
        Light colour 
        in Kelvin
        Connected load 
        in W / n
        Dimmability
        7202 700 K
        3 000 K
        6 500 K
        8,1DALI possible
        1 2002 700 K
        3 000 K 
        6 500 K
        13,6DALI possible
        1 8002 700 K
        3 000 K
        6 500 K
        23,8DALI possible

        Converter for standard LIGNO LED light strip

        DALIPower in
        Watts
        Voltage in VDimensions
        (L x W x H)
        -50220-240/24V242x40x16mm
        -75220-240/24V242x47x44mm
        dimmable50220-240/24V346x32x22mm
        dimmable80220-240/24V346x32x22mm
        dimmable160220-240/24V346x50x35mm

        Accessoires

        Connecting cable with socket and plug (GST08i275T)

        Calculation

        The following table serves as an orientating planning aid based on a sample room calculation – 
        Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
        However, it is not a substitute for a detailed light calculation by an expert.
         

          Required light strip length (lfm)Required light strip length (lfm)Required light strip length (lfm)
        Requirement lx/m2Distance visual task - light sourceLuminous intensity 720 lm/mLuminous intensity
        1200 lm/m
        Luminous intensity 
        1800 lm/m
        Bedroom
        50 lx/m2
        1,2m (high table)0,13 20,08 20,05 2
        1,6m (work surface)0,15 10,10 20,06 2
        2,5m (floor)0,19 10,13 20,08 2
        Children's bedroom/living room/hall/stairs/storeroom/
        basement
        100 lx/m2
        1,2m (high table)0,24 10,15 10,10 2
        1,6m (work surface)0,27 10,16 10,13 2
        2,5m (floor)0,35 10,20 10,15 1
        Bathroom/kitchen
        150 lx/m2
        1,2m (high table)0,35 10,25 10,15 1
        1,6m (work surface)0,40 10,27 10,16 1
        2,5m (floor)0,50 20,30 10,22 1
        Office/hobby room
        300 lx/m2
        1,2m (high table)0,69 30,45 10,30 1
        1,6m (work surface)0,83 30,50 10,35 1
        2,5m (floor)1,05 30,62 20,45 1
        Work surface (desk)
        500 lx/m2
        1,2m (high table)1,25 30,75 20,50 1
        1,6m (work surface)1,35 30,83 30,56 1
        2,5m (floor)1,80 31,05 30,69 2

                        1 recommended          2 only conditionally useful          3 not useful

        Example: Office/hobby room with 16 m2 floor space

         

        • required luminous intensity approx. 300 lx/m
        • Distance from light source 2.5 m
      • LED light strip, wide 

          
        LIGNO LED light strip for flush installation in acoustic claddings.

        Product affiliation acoustic cladding
        Filter category supplementary products

        High-quality surface-mounted light made of extruded aluminium profile

         

        Properties

        • Light strip 28 mm wide 
        • Compatible with profile variants _625-12-4, _625-12n25-4 and _625-22n40-4 
        • Harpoon formation 4.2 mm 
        • L x W x H: approx. (n x 100 + 15) x 28 x 27 mm max. length 2915 mm per element 
        • Diffusers made of white translucent PMMA, flush with profile 
        • LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V 
        • Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20 
        • Prepared for on-site connection to converters 

        Flush installation

        LIGNO LED light strips

        Luminous intensity
        in lm / m
        Light colour 
        in Kelvin
        Connected load 
        in W / n
        Dimmability
        7202 700 K
        3 000 K
        6 500 K
        8,1DALI possible
        1 2002 700 K
        3 000 K 
        6 500 K
        13,6DALI possible
        1 8002 700 K
        3 000 K
        6 500 K
        23,8DALI possible

        Converter for standard LIGNO LED light strip

        DALIPower in
        Watts
        Voltage in VDimensions
        (L x W x H)
        -50220-240/24V242x40x16mm
        -75220-240/24V242x47x44mm
        dimmable50220-240/24V346x32x22mm
        dimmable80220-240/24V346x32x22mm
        dimmable160220-240/24V346x50x35mm

        Accessoires

        Connecting cable with socket and plug (GST08i275T)

        Calculation

        The following table serves as an orientating planning aid based on a sample room calculation – 
        Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
        However, it is not a substitute for a detailed light calculation by an expert.
         

          Required light strip length (lfm)Required light strip length (lfm)Required light strip length (lfm)
        Requirement lx/m2Distance visual task - light sourceLuminous intensity 720 lm/mLuminous intensity
        1200 lm/m
        Luminous intensity 
        1800 lm/m
        Bedroom
        50 lx/m2
        1,2m (high table)0,13 20,08 20,05 2
        1,6m (work surface)0,15 10,10 20,06 2
        2,5m (floor)0,19 10,13 20,08 2
        Children's bedroom/living room/hall/stairs/storeroom/
        basement
        100 lx/m2
        1,2m (high table)0,24 10,15 10,10 2
        1,6m (work surface)0,27 10,16 10,13 2
        2,5m (floor)0,35 10,20 10,15 1
        Bathroom/kitchen
        150 lx/m2
        1,2m (high table)0,35 10,25 10,15 1
        1,6m (work surface)0,40 10,27 10,16 1
        2,5m (floor)0,50 20,30 10,22 1
        Office/hobby room
        300 lx/m2
        1,2m (high table)0,69 30,45 10,30 1
        1,6m (work surface)0,83 30,50 10,35 1
        2,5m (floor)1,05 30,62 20,45 1
        Work surface (desk)
        500 lx/m2
        1,2m (high table)1,25 30,75 20,50 1
        1,6m (work surface)1,35 30,83 30,56 1
        2,5m (floor)1,80 31,05 30,69 2

                        1 recommended          2 only conditionally useful          3 not useful

        Example: Office/hobby room with 16 m2 floor space

         

        • required luminous intensity approx. 300 lx/m
        • Distance from light source 2.5 m
      • LED light strip, plug-in mounting, narrow 

          
        LIGNO LED light strip for subsequent installation in acoustic gaps.

        Product affiliation acoustic cladding
        Filter category supplementary products

        High-quality surface-mounted light made of extruded aluminium profile

         

        Properties

        • Light strip 20 mm wide 
        • Compatible with profile variants _625-20-4 and _625-12n25-4 
        • Coated similar to RAL 9010 incl. end caps 
        • Harpoon formation 4.2 mm 
        • L x W x H: approx. (n x 100 + 15) x 20 x 27 mm max. length 2915 mm per element 
        • Diffusers made of white translucent PMMA, flush with profile 
        • LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V 
        • Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20 
        • Prepared for on-site connection to converters 

        Clip-on installation

        LIGNO LED light strips

        Luminous intensity
        in lm / m
        Light colour 
        in Kelvin
        Connected load 
        in W / n
        Dimmability
        7202 700 K
        3 000 K
        6 500 K
        8,1DALI possible
        1 2002 700 K
        3 000 K 
        6 500 K
        13,6DALI possible
        1 8002 700 K
        3 000 K
        6 500 K
        23,8DALI possible

        Converter for standard LIGNO LED light strip

        DALIPower in
        Watts
        Voltage in VDimensions
        (L x W x H)
        -50220-240/24V242x40x16mm
        -75220-240/24V242x47x44mm
        dimmable50220-240/24V346x32x22mm
        dimmable80220-240/24V346x32x22mm
        dimmable160220-240/24V346x50x35mm

        Accessoires

        Connecting cable with socket and plug (GST08i275T)

        Calculation

        The following table serves as an orientating planning aid based on a sample room calculation – 
        Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
        However, it is not a substitute for a detailed light calculation by an expert.
         

          Required light strip length (lfm)Required light strip length (lfm)Required light strip length (lfm)
        Requirement lx/m2Distance visual task - light sourceLuminous intensity 720 lm/mLuminous intensity
        1200 lm/m
        Luminous intensity 
        1800 lm/m
        Bedroom
        50 lx/m2
        1,2m (high table)0,13 20,08 20,05 2
        1,6m (work surface)0,15 10,10 20,06 2
        2,5m (floor)0,19 10,13 20,08 2
        Children's bedroom/living room/hall/stairs/storeroom/
        basement
        100 lx/m2
        1,2m (high table)0,24 10,15 10,10 2
        1,6m (work surface)0,27 10,16 10,13 2
        2,5m (floor)0,35 10,20 10,15 1
        Bathroom/kitchen
        150 lx/m2
        1,2m (high table)0,35 10,25 10,15 1
        1,6m (work surface)0,40 10,27 10,16 1
        2,5m (floor)0,50 20,30 10,22 1
        Office/hobby room
        300 lx/m2
        1,2m (high table)0,69 30,45 10,30 1
        1,6m (work surface)0,83 30,50 10,35 1
        2,5m (floor)1,05 30,62 20,45 1
        Work surface (desk)
        500 lx/m2
        1,2m (high table)1,25 30,75 20,50 1
        1,6m (work surface)1,35 30,83 30,56 1
        2,5m (floor)1,80 31,05 30,69 2

                        1 recommended          2 only conditionally useful          3 not useful

        Example: Office/hobby room with 16 m2 floor space

         

        • required luminous intensity approx. 300 lx/m
        • Distance from light source 2.5 m
      • LED light strip, plug-in mounting, wide 

          
        LIGNO LED light strip for subsequent installation in acoustic gaps.

        Product affiliation acoustic cladding
        Filter category suppementary products

        High-quality surface-mounted light made of extruded aluminium profile

         

        Properties

        • Light strip 28 mm wide 
        • Compatible with profile variants _625-12-4, _625-12n25-4 and _625-22n40-4 
        • Coated similar to RAL 9010 incl. end caps 
        • Harpoon formation 4.2 mm 
        • L x W x H: approx. (n x 100 + 15) x 20 x 27 mm
          max. length 2915 mm per element
           
        • Diffusers made of white translucent PMMA, flush with profile 
        • LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V 
        • Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20 
        • Prepared for on-site connection to converters 

        Clip-on installation

        LIGNO LED light strips

        Luminous intensity
        in lm / m
        Light colour 
        in Kelvin
        Connected load 
        in W / n
        Dimmability
        7202 700 K
        3 000 K
        6 500 K
        8,1DALI possible
        1 2002 700 K
        3 000 K 
        6 500 K
        13,6DALI possible
        1 8002 700 K
        3 000 K
        6 500 K
        23,8DALI possible

        Converter for standard LIGNO LED light strip

        DALIPower in
        Watts
        Voltage in VDimensions
        (L x W x H)
        -50220-240/24V242x40x16mm
        -75220-240/24V242x47x44mm
        dimmable50220-240/24V346x32x22mm
        dimmable80220-240/24V346x32x22mm
        dimmable160220-240/24V346x50x35mm

        Accessoires

        Connecting cable with socket and plug (GST08i275T)

        Calculation

        The following table serves as an orientating planning aid based on a sample room calculation – 
        Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
        However, it is not a substitute for a detailed light calculation by an expert.
         

          Required light strip length (lfm)Required light strip length (lfm)Required light strip length (lfm)
        Requirement lx/m2Distance visual task - light sourceLuminous intensity 720 lm/mLuminous intensity
        1200 lm/m
        Luminous intensity 
        1800 lm/m
        Bedroom
        50 lx/m2
        1,2m (high table)0,13 20,08 20,05 2
        1,6m (work surface)0,15 10,10 20,06 2
        2,5m (floor)0,19 10,13 20,08 2
        Children's bedroom/living room/hall/stairs/storeroom/
        basement
        100 lx/m2
        1,2m (high table)0,24 10,15 10,10 2
        1,6m (work surface)0,27 10,16 10,13 2
        2,5m (floor)0,35 10,20 10,15 1
        Bathroom/kitchen
        150 lx/m2
        1,2m (high table)0,35 10,25 10,15 1
        1,6m (work surface)0,40 10,27 10,16 1
        2,5m (floor)0,50 20,30 10,22 1
        Office/hobby room
        300 lx/m2
        1,2m (high table)0,69 30,45 10,30 1
        1,6m (work surface)0,83 30,50 10,35 1
        2,5m (floor)1,05 30,62 20,45 1
        Work surface (desk)
        500 lx/m2
        1,2m (high table)1,25 30,75 20,50 1
        1,6m (work surface)1,35 30,83 30,56 1
        2,5m (floor)1,80 31,05 30,69 2

                        1 recommended          2 only conditionally useful          3 not useful

        Example: Office/hobby room with 16 m2 floor space

         

        • required luminous intensity approx. 300 lx/m
        • Distance from light source 2.5 m
      • LED converter 

          
        Converter for standard LIGNO LED light strips.

        Product affiliation LED light stripes
        Filter category supplementary products

        Properties

        • Constant voltage supplies 24 V 
        • Suitable for indoor and outdoor installations 
        • Very stable output power 
        • High electronically reversible protection against short-circuit, overload and overtemperature 
        • Independent assembly possible 
      • LED cable extension 

          
        Cable extension for standard LIGNO LED light strips.

        Product affiliation LED light stripes
        Filter category supplementary products
        • Wieland plug
        • maximum 10 m supply cable per LIGNO LED light strip